Wires: choose the cut target · v1.0.1 manual reference
BOMBANANA Wires: Find the Correct Wire to Cut
Quick Answer
Count the wires connected to the module and read the active light color. Match that wire-count row and light-color column in your current manual, find the target wire color, and cut that wire on the actual panel.
- Reading time
- 2 minutes
- Difficulty
- Manual lookup
- Checked
- 2026-09-11
On this page
Guide details
Before you begin
The light color is an input to the table; the wire color is its answer. Count the connected wires before looking up which color to cut.
Wire-count and light-color lookup, using the v1.0.1 manual procedure.
- Status
- Version-specific guidance
- Edition
- v1.0.1 manual reference
- Platform
- PC · Steam
- Checked
- 2026-09-11
- Check note
- v1.0.1 manual reference. Follow the table supplied for your current game.
Before you set out
Prerequisites#
- Have the current Wires manual available and identify the wires connected to this module.
Route 01
Use the count and light to choose one wire#
Count the connected wires and read the light#
Count the wires actually connected to the module. Then read the active light color. Pass both clues together so the manual lookup uses this panel’s wire count and light.
Find the target color in the manual#
Open the matching wire-count row and active-light column. Their intersection gives the color of the wire to cut. Read the cell’s answer before selecting a wire; the active light color is a lookup clue, not an instruction to cut a wire of that same color.
Locate and communicate the chosen wire#
Find the wire with the target color on the actual panel. Make the selected wire clear to the player who will cut it, keeping the table’s target color separate from the light color used to find it.
Cut the selected wire#
Cut the wire identified by the matching cell. This action uses the result of the count-and-light lookup, so keep the chosen target unchanged between reading the manual and making the cut.