Switch module: positions and Enter · v1.0.1 manual reference
BOMBANANA Switch Module: Set the Switches and Press Enter
Quick Answer
Read all four light colors from left to right and the Braille number under each switch. Choose the matching color-order table in your current manual, set each switch up or down according to its condition, then press Enter.
- Reading time
- 2 minutes
- Difficulty
- Manual lookup
- Checked
- 2026-09-11
On this page
Guide details
Before you begin
Keep each switch’s light color paired with its Braille number. The full left-to-right color order chooses the table, and that table’s conditions determine the four positions.
The four-switch module, using the v1.0.1 manual procedure.
- Status
- Version-specific guidance
- Edition
- v1.0.1 manual reference
- Platform
- PC · Steam
- Checked
- 2026-09-11
- Check note
- v1.0.1 manual reference. Follow the table supplied for your current game.
Before you set out
Prerequisites#
- Collect all four light colors and their corresponding Braille numbers before choosing a table.
Route 01
Read the whole panel, set each switch, then submit#
Pair every color with its number#
Read all four light colors from left to right, then keep the Braille number beneath each switch attached to that position. Have all four pairs available before applying the conditions, because one switch’s condition can refer to another color’s number.
Choose the matching color-order table#
Find the table whose column colors match the panel’s complete left-to-right color order. Use that table for the switch settings. Matching only the first light is not enough to select the table.
Apply the condition for each column#
For a switch’s column, compare its number with the condition in your current table. When a colored-light symbol appears in a comparison, use the number beneath the switch with that light color. Keep the original color-number pairs available while working across the panel.
Set the indicated up or down position#
Use the position shown by the row whose condition matches. In the v1.0.1 manual, the upper row indicates up and the lower row indicates down. Apply each column’s condition to set all four switches.
Press Enter after the switches are set#
Once all four switches match the selected table, press Enter. The final Enter action comes after the position choices; finish setting the whole panel before submitting it.
Pocket list 02
Read a colored comparison as a number#
- A condition such as “greater than red” compares the current switch’s number with the number under the red light.
- “Less than red” uses that same red-light number as the comparison value. The light identifies which number to read.
- Keep the left-to-right pairs intact even when the referenced color appears later on the panel.